Nor-Maali’s new Norepox Aqua DTM is an ideal solution to enhance work safety and reduce VOC emissions

31/5/2021

Demanding conditions set high standards for industrial coatings. With Nor-Maali’s Norepox Aqua DTM you can reach the same corrosion protection level as with traditional solvent-based coatings. This green solution ensures a superior end-result!

Norepox Aqua DTM is designed for more environmentally friendly and safer painting, without compromising on technical properties. The fast-drying, water-borne, two component epoxy coating contains active anticorrosion pigments, which guarantees an excellent corrosion resistance.

Norepox Aqua DTM reaches the same corrosion protection level as solvent-based coatings of the same category

Today’s water-borne coating technologies are able to challenge the traditional industrial solvent-based counterparts. In fact, compared to the solvent-based coatings, the advanced water-borne coatings already reach the same corrosion protection performance and durability.

Norepox Aqua DTM is based on latest advanced water-borne technology. Thanks to this, Norepox Aqua DTM has excellent anticorrosion properties, as good as its solvent-based epoxy counterparts. A one coat system (DTM) of 120 µm DFT reaches corrosion category C3-M.

Nor-Maali’s new Norepox Aqua DTM is an ideal solution to enhance work safety and reduce carbon footprint

Steel beams sprayed with Norepox Aqua DTM.

User-friendly

Norepox Aqua DTM is safe both for the environment and for the painter. Since the coating barely contains flammable or explosive raw-materials, the risk of being exposed to hazardous substances minimizes significantly.

During the spraying forming of dry spray is minimal. The painted surface is always even and smooth. It also dries quickly at lower temperatures or in areas with limited ventilation.

Reducing VOC emissions is a challenge we must tackle together

Volatile Organic Compounds (VOCs) are one of the biggest causes of emissions. This is why, we in Nor-Maali are constantly developing more environmentally friendly products, which are as excellent in technical properties as their solvent-based counterparts. Since water-borne coatings evaporate mainly water into the air, they are clearly a greener choice.

Why to choose Norepox Aqua DTM?

  • EXCELLENT SPRAYING PROPERTIES
  • FAST DRYING EVEN IN LOWER TEMPERATURES
  • EXCELLENT CORROSION PROTECTION
  • SUPERIOR END-RESULT: SMOOTH SURFACE
  • MULTIPURPOSE – A PRIMER, TOP COAT, OR DIRECT-TO-METAL COATING
  • WATER-BORNE, GREEN, AND SAFE SOLUTION
Nor-Maali’s new Norepox Aqua DTM is an ideal solution to enhance work safety and reduce carbon footprint

Nor-Maali’s new Norepox Aqua DTM is an ideal solution to enhance work safety and reduce carbon footprint.

 

Norepox Aqua DTM

Facts behind the surface

  • SEMI-GLOSS, WATER-BORNE EPOXY COATING
  • USE AS A PRIMER, TOP COAT, OR DIRECT-TO-METAL COATING
  • FOR SELECTED INDUSTRIAL SEGMENTS: GENERAL STEEL STRUCTURES, MACHINERY AND EQUIPMENT IN ENVIRONMENTAL CLASSES C2-C4
  • VOLUME SOLIDS 50%
  • VOC: 62 G/L
  • MIXING RATIO: 4:1
  • POT LIFE: 1.5 H
  • SINGLE COAT 120 µm DFT: C3-M
  • AVAILABLE IN RAL AND NCS S SHADES

Learn more about the product from our sales experts.

Also read: Looking for environmental friendly industrial coating with ACT-approval? Nor-Maali’s water-borne Normadur Aqua DTM and Akvanor 100 SG are certified.

Nor-Maali´s new Normafloor Aqua – a low-emission and user-friendly solution for concrete floors

21/3/2023 Normafloor Aqua is Nor-Maali's new water-borne epoxy coating in our growing range of more sustainable products and solutions. Normafloor Aqua is a CE marked and M1 classified, being a great choice for construction sites where the floor coating must be a low-emitting and a user-friendly.

Maintenance painting in winter – Silja Serenade in dry dock

15/2/2023 M/S Silja Serenade was maintenance painted with Jotun coatings in January. The dry docking lasted 16 days, during which the ship's underwater hull, topside and part of the tanks were painted. The prevailing weather conditions imposed their own restrictions on outdoor docking.

MyStar was painted with coatings supplied by Nor-Maali Oy

3/1/2023 Rauma Marine Construction has delivered MyStar car and passenger ferry to its customer Tallink. Steel surface coatings were supplied by Nor-Maali Oy together with Jotun. Products used were e.g. Jotamastic 90, Hardtop XPF and Marathon IQ2.

Nor-Maali´s dealer network expanded to Denmark!

13/12/2022 Sadolin Glostrup A/S has joined Nor-Maali´s dealer network as the newest member. As a result of this cooperation, Nor-Maali´s industrial coatings are now available also in Denmark.

Nor-Maali´s high volume solids polyurethane coating Normafine 40 HS – faster drying at lower temperatures

23/11/2022 Painting process cost reduction is currently being considered in many industrial paint shops. How to save energy without compromising quality and speed? Painting costs can be influenced by e.g. with the drying temperature of the paint and the number of layers of the painting system. The right product choice is therefore a very important part of the overall cost of the process. In a problematic energy situation, Normafine 40 HS is a cost-effective alternative for both topcoat and direct-to-metal coating.