Barrier 80

Zinc rich epoxy coating

Paint type

This is a two component polyamide cured zinc rich epoxy coating. It is a high solids, high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 2 and ISO 12944-5. It provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. This product complies with ASTM D520 type II zinc dust.

Typical uses

Suitable for structural steel and piping exposed in corrosivity categories up to C5 (ISO 12944-2). Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer for coating systems where extended durability is required.

Tested in accordance with ISO 12944-6, high expected durability in corrosivity category C5-I

Technical data

Volume solids (vol.%) 61
Mass of solids (g/l) 2134
VOC-value (g/l) 366

Barrier 80 -technical data sheet

Download (PDF) 3/21
Download (PDF) 3/21
Download (PDF) 3/21

Barrier 80 -MSDS Comp.A

Download (PDF) 04.10.2021
Download (PDF) 04.10.2021
Download (PDF) 04.10.2021
Download (PDF) 04.10.2021
Download (PDF) 04.10.2021
Download (PDF) 04.10.2021

Barrier 80 -MSDS Comp.B

Download (PDF) 26.11.2019
Download (PDF) 26.11.2019
Download (PDF) 26.11.2019
Download (PDF) 26.11.2019
Download (PDF) 26.11.2019
Download (PDF) 26.11.2019