Jotamastic Smart Pack

Epoxy mastic

Paint type

This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids product. Specially designed for application with brush and roller. 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible or required. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, concrete and a range of aged coating surfaces.

Typical uses

General: Primarily designed for smaller maintenance and repair jobs.

Marine: Outside hulls, exterior and interior areas, including water ballast tanks.

Protective: Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Grain, Newcastle Occupational Health
Low flame spread certificate according to IMO FTPC Part 5 (IMO Res. A.653(16)) / IMO FTPC Annex 2 Item 2.2.

Technical data

Volume solids (vol.%) 75
Mass of solids (g/l) 1145
VOC-value (g/l) 255

Jotamastic Smart Pack -technical data sheet

Download (PDF) 08/19
Download (PDF) 08/19
Download (PDF) 08/19

Jotamastic Smart Pack -MSDS Comp.A

Download (PDF) 03.07.2019
Download (PDF) 03.07.2019
Download (PDF) 03.07.2019
Download (PDF) 03.07.2019
Download (PDF) 03.07.2019
Download (PDF) 03.07.2019

Jotamastic Smart Pack -MSDS Comp.B

Download (PDF) 03.09.2020
Download (PDF) 03.09.2020
Download (PDF) 03.09.2020
Download (PDF) 03.09.2020
Download (PDF) 03.09.2020
Download (PDF) 03.09.2020