Muki EPS

Epoxy shop primer

Paint type

This is a two component chemically curing epoxy coating. It is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning. It is fast drying making it suitable for stacking shortly after application. Can be used as temporary primer in a new construction phase, as holding primer or as primer in a complete coating system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates and recommended to be applied in an automated shop priming line in lower film thicknesses or applied by airless spray when used as holding primer. Compatible with advanced welding technologies including MIG, MAG and G-FCAW when applied in low film thickness.

Typical uses

Marine: Suitable as shop primer or holding primer on vessels.

Protective: Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Technical data

Volume solids (vol.%) 25
Mass of solids (g/l) 491
VOC-value (g/l) 609

Muki EPS -MSDS Comp.A

Download (PDF) 18.05.2020
Download (PDF) 18.05.2020
Download (PDF) 18.05.2020
Download (PDF) 18.05.2020
Download (PDF) 18.05.2020
Download (PDF) 18.05.2020

Muki EPS -MSDS Comp.B

Download (PDF) 24.01.2018
Download (PDF) 24.01.2018
Download (PDF) 24.01.2018
Download (PDF) 24.01.2018
Download (PDF) 24.01.2018
Download (PDF) 24.01.2018