Safeguard Universal ES

Vinyl epoxy coating

Paint type

This is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers and antifouling systems. Can be used as tie coat / holding primer for a wide range of topcoats. To be used as tie coat in atmospheric and immersed environments. Suitable on approved primers on aluminium, carbon steel, galvanised and stainless steel substrates. It can be applied at sub zero surface temperatures.

Typical uses

General: Suitable as tie coat for a wide range of Jotun antifouling products.

Marine: Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas.

Protective: Suitable as tie coat in a complete system exposed to a wide range of corrosive environments up to very high, and immersed. Recommended for offshore environments, including splash zones, water inlets, cooling pipes, jetties and bridges.

Technical data

Volume solids (vol.%) 62
Mass of solids (g/l) 1038
VOC-value (g/l) 362

Safeguard Universal ES -technical data sheet

Download (PDF) 3/21
Download (PDF) 3/21
Download (PDF) 3/21

Safeguard Universal ES -MSDS Comp.A

Download (PDF) 10.07.2019
Download (PDF) 10.07.2019
Download (PDF) 10.07.2019
Download (PDF) 10.07.2019
Download (PDF) 10.07.2019
Download (PDF) 10.07.2019

Safeguard Universal ES -MSDS Comp.B

Download (PDF) 08.04.2020
Download (PDF) 08.04.2020
Download (PDF) 08.04.2020
Download (PDF) 08.04.2020
Download (PDF) 08.04.2020
Download (PDF) 08.04.2020