Meet Nor-Maali´s Miika Bergdahl – tips for painting new water-borne Normadur Aqua DTM


When painting with Nor-Maali´s water-borne coatings, for example Normadur Aqua DTM, stable conditions ensure a robust and a premium film. Besides the environment conditions, such as humidity and temperature, there are several practical tips to be kept in mind, says Miika Bergdahl, Nor-Maali’s test painter. Read here below more of Miika and his tips for applying Normadur Aqua DTM.

Miika has worked in spray painting for 25 years, and he has comprehensive experience in industrial paints and coatings as a painter at ACE/OEM company. Miika joined Nor-Maali   in the fall 2018.

With Nor-Maali´s Normadur Aqua DTM stable conditions ensure a robust film

Miika Bergdahl

As part of R&D and technical service

After starting to work in Nor-Maali, Miika’s view of industrial coatings and the factors influencing the “fit and use” have broadened considerably. In order for a customer to have a functioning product, considerable amount of R&D and testing shall be done – one crucial part is test painting.  In Nor-Maali’s R&D work, cooperation between the chemist and the test painter, plays an important role. The best result is thought and tested together.

In addition to the R&D work Miika’s other tasks include e.g. painting of test plates for various needs (e.g. for Silko and SSG standard test), daily quality control paintings, spraying of sample plates.

Test painting at customer´s is the best way to learn and understand what are the specific needs. Part of Nor-Maali’s technical service concept is test painting at customer´s premises, in which Miika also sometimes participates.

Most of the painting is done with an airless spray, sometimes the work also includes air-assisted gravity feed spraying, and brushing as well as rolling. Usually the surface to be painted is sandblasted steel, but sometimes paintings are made e.g. for smooth steel and galvanized and aluminum surfaces.

Working at Nor-Maali

Miika says that his current job differs significantly from his previous job in the industry. In the work of a test painter, spraying must be done really accurately. There cannot be any variation in film thickness, as usually the painted plate goes to some test. In Nor-Maali, Miika mainly paints small test plates, while in the previous job he painted large machinery components.

Miika likes his work as test painter, because here he gets to try a lot of different coatings and the effect of different painting methods on the end result. When spraying, different coatings and their painting properties must be taken into account. For example, the spraying properties of epoxy are different from those of polyurethane coating, and a high solid coating requires a calmer hand movement than a product with a lower solid content.

In his free time, Miika builds scale models. He also needs painting skills in his hobby, as an important part of making scale models is painting them with a pencil spray gun and brush.

With Nor-Maali´s Normadur Aqua DTM stable conditions ensure a robust film

With Nor-Maali´s Normadur Aqua DTM stable conditions ensure a robust film. Miika is painting Normadur Aqua DTM at customer´s premises.

Painting of Normadur Aqua DTM

Spraying water-borne polyurethane coating differs from painting many other coatings. This must be done more accurately than spraying solvent-based polyurethane coating. Environmental conditions also need to be further optimized.

Miika’s tips for painting Normadur Aqua DTM:

  • MIX THE PAINT MIXTURE PROPERLY. First mix component A thoroughly and then add the hardener. The component A and hardener are like water and oil; they naturally don’t want to mix with each other. When the components are stirred mechanically all the way to the bottom of the can for about 5 minutes, the paint mixture looks glossy and when painted, the product forms a durable and glossy surface. Insufficient mixing will result in uneven curing. The paint will remain matt.


  • POT-LIFE OF THE PAINT MIXTURE MUST BE CHECKED WITH A CLOCK. The paint mixture is still flowable after the pot-life has exceeded, but such a coating can no longer be used as its adhesion to the surface has been reduced.


  • THE PAINT OUTPUT IS SURPRISINGLY HIGH. Therefore, it is advisable to choose a smaller nozzle for spraying Normadur Aqua DTM than when spraying other polyurethane coatings.


  • WATER-BORNE POLYURETHANE COATINGS HAVE A MAXIMUM FILM THICKNESS that can be painted without blisters. If this blister-free thickness is exceeded, the surface becomes matt and uneven. This film thickness limit is not visible from the wet paint film, but only appears when the paint surface is almost dry. Therefore, it is not possible to paint an extra film “for fun” with this paint. The blister-free thickness of Normadur Aqua DTM is much higher than with many water-borne polyurethane coatings.


  • THE COLOR OF WATER-BORNE COATINGS DARKENS CONSIDERABLY AS THE PAINT DRIES. Therefore, the shade cannot be compared during painting.


  • DRYING CONDITIONS MATTER. Higher temperature and lower humidity help to achieve a finer end result. The painting result can easily be ruined by poor ventilation.

“When you remember these tips, Normadur Aqua DTM can be used to spray great looking, glossy surfaces. Normadur Aqua DTM is worth a try!” Miika says.

Environmental Product Declaration for Normafine 40 HS

15/3/2024 Nor-Maali's solvent-based Normafine 40 HS polyurethane coating has received an Environmental Product Declaration (EPD). Previously, Nor-Maali's products with an EPD included the water-borne Norepox Aqua DTM and six solvent-based coatings.

Speed up Your Production with Nor-Maali’s Normathane 50 FD Polyurethane Topcoat

7/2/2024 Normathane 50 FD is Nor-Maali's new solvent-based polyurethane topcoat designed to ensure a fast production throughput. Together with a quick-drying epoxy primer, this semi-gloss polyurethane topcoat enhances your production process.

Oü Nor-Maali Expands Business Operations in Estonia

11/1/2024 Oü Nor-Maali, a subsidiary of Nor-Maali Oy, is expanding its business operations in Estonia. The company has opened a new branch in Narva, known as the industrial hub of Eastern Estonia. This new facility is part of Nor-Maali's strategy to strengthen its presence in the Eastern Estonian region.

The world’s largest cruise ship, Icon of the Seas, was painted with coatings supplied by Nor-Maali Oy

14/12/2023 The luxury cruise ship Icon of the Seas, built by Meyer Turku, left the shipyard at the end of November. The steel surfaces of the ship were painted with high-quality Jotun coatings supplied by Nor-Maali Oy, including products such as Jotamastic 90, Hardtop AX and SeaQuantum Classic S.

Improved opacity with coloured bases

14/12/2023 Nor-Maali offers its customers a comprehensive range of polyurethane coatings for anti-corrosion painting of steel surfaces. The colours of the objects to be painted vary from light to dark, including bright shades as well. With Nor-Maali's polyurethane coatings bright yellow and red shades also have good opacity.
Nor-Maalin vesiohenteinen Normadur Aqua DTM polyuretaanimaali

Water-borne glossy polyurethane coating