Epocoat Aqua Primer – the water-borne epoxy primer for demanding anti-corrosion painting

12/6/2023

Epocoat Aqua Primer is Nor-Maali’s new epoxy primer that combines first-class technical properties and environmental friendliness. With water-borne Epocoat Aqua Primer you can offer a more sustainable, higher-level coating choice for demanding conditions.

Epocoat Aqua Primer exceeds the corrosion resistance of solvent-based primers

Today, water-borne coatings can already outperform solvent-based products, offering better corrosion resistance than traditional solvent-based industrial coatings. “The new Epocoat Aqua Primer does this”, says development chemist Ville Holopainen.

Epocoat Aqua Primer is designed to be used as a primer in corrosion classes C3-C5 (ISO 12944-2). The product can be used with both water-borne and solvent-based topcoats (hybrid systems). Two layer paint system Epocoat Aqua Primer + Norepox Aqua DTM reaches the corrosion class C5M with a total paint film of 180 µm. As one coat system, Epocoat Aqua Primer reaches C3M corrosion class with 80 µm DFT.

In addition to steel surfaces, Epocoat Aqua Primer can also be painted on aluminum and galvanized surfaces.

Nor-Maali´s water-borne epoxy Epocoat Aqua Primer

Epocoat Aqua Primer – water-borne epoxy primer for anti-corrosion painting.

Epocoat Aqua Primer is easy to spray and it dries fast

Epocoat Aqua Primer is a water-borne epoxy primer intended for general steel structures and machinery & equipment. It is easy to spray. The spray fan is even and forming of dry spray is minimal. Epocoat Aqua Primer creates a very smooth surface for the topcoat of the paint system.

Epocoat Aqua Primer is a quick drying coating with excellent overcoating properties. The primer can be overcoated with same type of paint after three hours and with polyurethane coatings after four hours (+23 °C). Thanks to this a paint system with corrosion class C5M can be painted during one work shift. Epocoat Aqua primer is a low odour product, having a positive effect to the working conditions.

Epocoat Aqua Primer is a more responsible choice for industrial painting

Thanks to the low VOC content Epocoat Aqua Primer is a safer option not only for the environment but also for the user. The Water-borne coatings reduce exposure to dangerous substances, and e.g. the risk of explosion in the paint shop is significantly reduced as flammable and explosive raw-materials are barely used.

Why to choose Epocoat Aqua Primer?

  • WATER-BORNE, A MORE ENVIRONMENTALLY FRIENDLY AND USER-SAFE OPTION
  • FOR DEMANDING ANTI-CORROSION PAINTING
  • USER FRIENDLY – EASY TO SPRAY, LOW ODOUR
  • FAST DRYING

Nor-Maali´s water-borne epoxy Epocoat Aqua Primer

FACTS BEHIND THE SURFACE: Epocoat Aqua Primer

  • SEMI-MATT, WATER-BORNE EPOXY PRIMER
  • VOLUME SOLIDS: 47 %
  • VOC: 55 G/L
  • MIXING RATIO: 5:1
  • POT LIFE: 5 H
  • COLOUR: GREY (NSC S3500-N)

Learn more about the product from our sales.

Nor-Maali´s water-borne epoxy Epocoat Aqua Primer

Nor-Maali’s new water-borne Norecryl Aqua DTM provides a weather-resistant alternative to anticorrosion painting – without isocyanate

27/9/2023 Nor-Maali's new water-borne Norecryl Aqua DTM, a groundbreaking 2-component acrylic coating combines the corrosion resistance of epoxies with the weather resistance of polyurethanes. This environmentally friendly direct-to-metal coating also ensures user safety as it contains no isocyanates.

The pedestrian bridge at Heureka was maintenance painted using the SILKO coating system by Nor-Maali

26/9/2023 Korroosiotyö Korkal has maintenance painted the pedestrian bridge at Heureka in Vantaa, using the SILKO coating system by Nor-Maali: LIVI B.2+ Normastic 405 – Normastic 405 – Normadur 65 HS.

Uudenkaupungin Työvene is constructing a dredger

8/9/2023 Uudenkaupungin Työvene is in the process of building a dredger, set for delivery to Poland. The steel vessel will be painted with Jotun coatings, provided by Nor-Maali. The primary product used for the painting is Jotacote Universal S120, which helps reduce VOC emissions.

Nor-Maali Sweden introduces a new distributor: Tinter Jönköping

5/9/2023 The dealer network of Nor-Maali in Sweden welcomes a new member – Tinter Jönköping. Now we can serve our customers even better in the Jönköping area. Nor-Maali´s industrial coatings are available from 12 distributors in Sweden.

Nor-Maali´s direct-to-metal coatings offer time and cost savings

15/8/2023 Traditionally, industrial painting systems have been implemented using a two-layer painting process. The primer provides corrosion resistance, while the topcoat delivers the desired appearance. However, the use of single-coat systems has gradually become more common when there's a need to save on time and overall costs.