Marathon 550

Epoxy coating

Paint type

This is a two component polyamine cured epoxy coating. It is a surface tolerant product that can be applied on moist substrates. Will continue to cure when immersed in water. The product provides high abrasion resistance. Suitable for environments with very high corrosivity, such as areas in the splash or tidal zone. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. It has excellent resistance to cathodic disbonding. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium and concrete substrates.

Typical uses

Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially suited in areas where high mechanical strength is required, such as splash or tidal zones. Compatible with cathodic protection systems.

Technical data

Volume solids (vol.%) 85
Mass of solids (g/l) 1435
VOC-value (g/l) 165

Marathon 550 -technical data sheet

Download (PDF) 3/21
Download (PDF) 3/21
Download (PDF) 3/21

Marathon 550 -Application guide

Download (PDF) 11/20

Marathon 550 -MSDS Comp.A

Download (PDF) 21.07.2022
Download (PDF) 21.07.2022
Download (PDF) 21.07.2022
Download (PDF) 21.07.2022
Download (PDF) 21.07.2022
Download (PDF) 21.07.2022

Marathon 550 -MSDS Comp.B

Download (PDF) 24.03.2022
Download (PDF) 24.03.2022
Download (PDF) 24.03.2022
Download (PDF) 24.03.2022
Download (PDF) 24.03.2022
Download (PDF) 24.03.2022