Epoxy HR

Phenolic/novolac epoxy coating

Paint type

This is a two component polyamine cured phenolic/novolac epoxy coating. It is heat resistant up to 205 °C (401 °F) and can be applied on hot substrates up to 150 °C (302 °F). The standard aluminium version may be used as primer, mid coat or finish coat. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates.

Typical uses

Protective: Designed as corrosion protection for surfaces operating at elevated temperatures where long corrosion protection is desired. Suitable for insulated and non insulated surfaces.

Technical data

Volume solids (vol.%) 63
Mass of solids (g/l) 1235
VOC-value (g/l) 365

Epoxy HR -technical data sheet

Download (PDF) 7/21
Download (PDF) 7/21
Download (PDF) 7/21

Epoxy HR -Application guide

Download (PDF) 4/21

Epoxy HR -MSDS Comp.A

Download (PDF) 24.01.2022
Download (PDF) 24.01.2022
Download (PDF) 24.01.2022
Download (PDF) 24.01.2022
Download (PDF) 24.01.2022
Download (PDF) 24.01.2022

Epoxy HR -MSDS Comp.B

Download (PDF) 29.03.2022
Download (PDF) 29.03.2022
Download (PDF) 29.03.2022
Download (PDF) 29.03.2022
Download (PDF) 29.03.2022
Download (PDF) 29.03.2022