Jotamastic 80 Alumiini

Epoxy mastic coating

Paint type

This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. It is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or desired. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.

Typical uses

General: Primarily designed for maintenance and repair.

Marine: Outside hulls, exterior and interior areas.

Protective: Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Note! Technical data presented is for standard version of the coating.

Technical data

Volume solids (vol.%) 80
Mass of solids (g/l) 1251
VOC-value (g/l) 249

Jotamastic 80 Alumiini -technical data sheet

Download (PDF) 02/19
Download (PDF) 02/19
Download (PDF) 02/19

Jotamastic 80 Alumiini -MSDS Comp.A

Download (PDF) 19.11.2020
Download (PDF) 19.11.2020
Download (PDF) 19.11.2020
Download (PDF) 19.11.2020
Download (PDF) 19.11.2020
Download (PDF) 19.11.2020

Jotamastic 80 Alumiini -MSDS Comp.B

Download (PDF) 04.06.2020
Download (PDF) 04.06.2020
Download (PDF) 04.06.2020
Download (PDF) 04.06.2020
Download (PDF) 04.06.2020
Download (PDF) 04.06.2020