Jotamastic 90 Alumiini

Aluminium pigmented epoxy mastic coating

Paint type

This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. It is aluminium pigmented for improved barrier effect. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.

Typical uses

General: Primarily designed for maintenance and repair.

Marine: Outside hulls, exterior and interior areas.

Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Note! Technical data presented is for standard version of the coating.

Technical data

Volume solids (vol.%) 80
Mass of solids (g/l) 1166
VOC-value (g/l) 234

Jotamastic 90 Alumiini -technical data sheet

Download (PDF) 03/20
Download (PDF) 03/20
Download (PDF) 03/20

Jotamastic 90 Alumiini -MSDS Comp.A

Download (PDF) 07.12.2020
Download (PDF) 07.12.2020
Download (PDF) 07.12.2020
Download (PDF) 07.12.2020
Download (PDF) 07.12.2020
Download (PDF) 07.12.2020

Jotamastic 90 Alumiini -MSDS Comp.B

Download (PDF) 02.05.2019
Download (PDF) 02.05.2019
Download (PDF) 02.05.2019
Download (PDF) 02.05.2019
Download (PDF) 02.05.2019
Download (PDF) 02.05.2019

Jotamastic 90 Alumiini -MSDS WG or COMP.C

Download (PDF) 04.05.2021
Download (PDF) 04.05.2021
Download (PDF) 04.05.2021
Download (PDF) 04.05.2021
Download (PDF) 04.05.2021
Download (PDF) 04.05.2021