Muki Z 2001

Zinc ethyl silicate shop primer

Paint type

This is a two component inorganic low zinc moisture curing zinc ethyl silicate coating. It is a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning. It is fast drying and has good abrasion resistance making it suitable for stacking shortly after application. Can be used as temporary primer in a new construction phase or as primer in a complete coating system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates and recommended to be applied in an automated shop priming line. Compatible with advanced welding technologies including MIG, MAG and G-FCAW.

Typical uses

Marine: Suitable as shop primer for entire vessels.

Protective: Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Technical data

Volume solids (vol.%) 28
Mass of solids (g/l) 772
VOC-value (g/l) 628

Muki Z 2001 -technical data sheet

Download (PDF) 3/21
Download (PDF) 3/21
Download (PDF) 3/21

Muki Z 2001 -MSDS Comp.A

Download (PDF) 04.06.2019
Download (PDF) 04.06.2019
Download (PDF) 04.06.2019
Download (PDF) 04.06.2019
Download (PDF) 04.06.2019
Download (PDF) 04.06.2019

Muki Z 2001 -MSDS Comp.B

Download (PDF) 04.06.2019
Download (PDF) 04.06.2019
Download (PDF) 04.06.2019
Download (PDF) 04.06.2019
Download (PDF) 04.06.2019
Download (PDF) 04.06.2019