A two-component, fast drying high solids epoxy primer pigmented with micaceous iron oxide. The paint cures in low temperatures.
NORECOAT HS PRIMER is specially recommended for blast cleaned steel surfaces as a primer or a midcoat in epoxy paint systems in environmental classes C2 – C5. It is also suitable for frameworks of industry buildings, pipe bridges, conveyors and structural constructions of process industry. Suitable for the projects, where there is a requirement for use of Mastic type coatings. NORECOAT HS PRIMER can also be used for immersion service in fresh water and sea water.
Volume solids (vol.%) | 78 |
Mass of solids (g/l) | 1390 |
VOC-value (g/l) | 190 |
Download (PDF) | ||
Download (PDF) | ||
Download (PDF) |
Download (PDF) | 3/22 | |
Download (PDF) | 3/22 | |
Download (PDF) | 3/22 | |
Download (PDF) | 3/22 | |
Download (PDF) | 3/22 |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 | |
Download (PDF) | 04.10.2022 |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 | |
Download (PDF) | 09.08.2022 |