Normadur 50

Semi gloss polyurethane coating

  • DTM (direct to metal)

Paint type

Semi gloss, two-component polyurethane topcoat with an aliphatic isocyanate curing agent. Cures also at low temperatures and contains rust preventing pigments.

Typical uses

Recommended for use as a topcoat on steel structures, containers and vehicles both in and out of doors in epoxy and polyurethane paint systems. NORMADUR 50 has a good gloss and colour retention. Can also be used as a single coat (DTM) system on blast cleaned steel surfaces and on clean steel thin plates in environmental classes C1-C2 (C3 with limitations).

Technical data

Volume solids (vol.%) 50
Mass of solids (g/l) 650
VOC-value (g/l) 450

Normadur 50 -technical data sheet

Download (PDF) 1/19
Download (PDF) 1/19
Download (PDF) 1/19
Download (PDF) 1/19
Download (PDF) 1/19
Download (PDF) 1/19

Normadur 50 -MSDS Comp.A

Download (PDF) 06.05.2020
Download (PDF) 06.05.2020
Download (PDF) 06.05.2020
Download (PDF) 06.05.2020
Download (PDF) 06.05.2020
Download (PDF) 06.05.2020
Download (PDF) 06.05.2020
Download (PDF) 06.05.2020
Download (PDF) 06.05.2020

Normadur 50 -MSDS Comp.B

Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020
Download (PDF) 22.06.2020