Tankguard Plus

Phenolic/novolac epoxy coating

Paint type

This is a two component polyamine cured phenolic/novolac epoxy coating. It has a high resistance to most sour crude oils and a wide range of chemicals and solvents. It has outstanding chemical resistance to crude oil at temperatures up to 160 °C. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.

Typical uses

Protective:
Specially designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. This coating has very good resistance to high temperature products. Refer to Protective Product Resistance List.

Technical data

Volume solids (vol.%) 70
Mass of solids (g/l) 1258
VOC-value (g/l) 342

Tankguard Plus -technical data sheet

Download (PDF) 03/21
Download (PDF) 03/21
Download (PDF) 03/21

Tankguard Plus -Application guide

Download (PDF) 09/19

Tankguard Plus -MSDS Comp.A

Download (PDF) 18.07.2022
Download (PDF) 18.07.2022
Download (PDF) 18.07.2022
Download (PDF) 18.07.2022
Download (PDF) 18.07.2022
Download (PDF) 18.07.2022

Tankguard Plus -MSDS Comp.B

Download (PDF) 22.06.2022
Download (PDF) 22.06.2022
Download (PDF) 22.06.2022
Download (PDF) 22.06.2022
Download (PDF) 22.06.2022
Download (PDF) 22.06.2022