Hardtop XPF

Fast drying acrylic polyurethane coating

Paint type

This is a two component chemically curing aliphatic acrylic polyurethane coating. It is fast drying. It is a high solids product. It has a glossy finish with very good gloss retention. To be used as topcoat in atmospheric environments. It can be applied at sub zero surface temperatures.

Typical uses

Marine: Recommended for topside, deck and superstructure.

Protective: Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. Used as a topcoat in fast drying pre-qualified NORSOK systems.

NORSOK System 1, Rev.5
Grain, Newcastle Occupational Health
When used as part of an approved scheme, this material has the following certification:
– Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8

Technical data

Volume solids (vol.%) 63
Mass of solids (g/l) 1065
VOC-value (g/l) 335

Molslinjen – M/S Hammershus

Nor-Maali Oy delivered coatings to the first new building ship entirely constructed at Rauma Marine Constructions.

Hardtop XPF -technical data sheet

Download (PDF) 3/21
Download (PDF) 3/21
Download (PDF) 3/21

Hardtop XPF -Application guide

Download (PDF) 1/20

Hardtop XPF -MSDS Comp.A

Download (PDF) 29.03.2022
Download (PDF) 29.03.2022
Download (PDF) 29.03.2022
Download (PDF) 29.03.2022
Download (PDF) 29.03.2022
Download (PDF) 29.03.2022

Hardtop XPF -MSDS Comp.B

Download (PDF) 23.03.2023
Download (PDF) 23.03.2023
Download (PDF) 23.03.2023
Download (PDF) 23.03.2023
Download (PDF) 23.03.2023
Download (PDF) 23.03.2023

Molslinjen – M/S Hammershus

Nor-Maali Oy delivered coatings to the first new building ship entirely constructed at Rauma Marine Constructions.