Norepox HS

Epoxy coating

  • DTM (direct to metal)

Paint type

Two-component epoxy topcoat with a special hardener. Can be piled after a short drying time. The paint cures at low temperatures.

Typical uses

Used over blast cleaned steel surfaces as a single-coat (DTM) system in environmental classes C2-C3 and as a topcoat in epoxy paint systems in environmental classes C2-C5. Norepox HS is specially recommended for frameworks of industry buildings, pipe bridges, conveyors and structural constructions of process industry.

Technical data

Volume solids (vol.%) 68
Mass of solids (g/l) 1100
VOC-value (g/l) 290

Norepox HS -technical data sheet

Download (PDF) 4/19
Download (PDF) 4/19
Download (PDF) 4/19
Download (PDF) 4/19
Download (PDF) 4/19
Download (PDF) 4/19

Norepox HS -MSDS Comp.A

Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020
Download (PDF) 27.08.2020

Norepox HS -MSDS Comp.B

Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020
Download (PDF) 31.08.2020