Nor-Maali´s new Normafloor Aqua – a low-emission and user-friendly solution for concrete floors

21/3/2023

Normafloor Aqua is Nor-Maali’s new water-borne epoxy coating in our growing range of more sustainable products and solutions. Normafloor Aqua is a CE marked and M1 classified, being a great choice for construction sites where the floor coating must be a low-emitting and a user-friendly.

Normafloor Aqua is a sustainable choice for concrete floors – CE marked and M1 classified

Normafloor Aqua combines high level technical properties with easiness to apply and safety for the user.

Normafloor Aqua is a CE marked product, so it can be used as a concrete coating for all construction sites. The coating is also M1 classified, being an excellent choice for projects where the building material must be a low-emitting.

Normafloor Aqua can be used for floors of public places, warehouses, basements, garages, ice rinks, factories and paper machine halls: designed for protection of light mechanical and chemical wear on concrete floors.

Nor-Maali´s new Normafloor Aqua for concrete floors

Low odour Normafloor Aqua dries fast

Normafloor Aqua is a water-borne epoxy coating for concrete floors that forms a very smooth and stylish looking surface. The product is easy and quick to apply. You can carry out the painting even if there are others nearby – the product is almost odorless.

Normafloor Aqua is intended to be applied as a two-coat system. The first coat is applied to the floor using a brush or a mohair roller. The second coat is recommended to be applied the next day, but within next 3 to 5 days, depending on the conditions, in order to guarantee sufficient adhesion between the coats. Second coat is applied with a brush or a mohair roller. The product blends well with the older paint surface and you can hardly see the painting lines.

Normafloor Aqua dries very quickly. The applied surface is walk-on-dry on after just six hours1. The end result is a very smooth surface. Because the painted surface becomes very hard and durable, it is also easy to clean.

Nor-Maali´s new Normafloor Aqua for concrete floors

Nor-Maali´s new Normafloor Aqua for concrete floors.

Why to choose Normafloor Aqua?

  • WATER-BORNE AND LOW-EMITTING CHOICE FOR CONCRETE FLOORS
  • CE MARKED
  • M1 CLASSIFIED
  • USER FRIENDLY – LOW ODOR
  • FAST DRYING

Nor-Maali´s new Normafloor Aqua for concrete floors

FACTS BEHIND THE SURFACE: Normafloor Aqua

  • SEMI-GLOSS, WATER-BORNE EPOXY COATING TO CONCRETE FLOORS
  • VOLUME SOLIDS 46 %
  • VOC 55 G/L
  • MIXING RATIO 4:1
  • POT LIFE: 1.5 H
  • STANDARD COLOURS: RAL 7032, RAL 7035, RAL 7038, NSC S3500-N. OTHER COLOURS WITH LIMITATIONS.

Learn more about the product from our sales experts.

 

1 TDS (23 °C)

Nor-Maali’s water-borne industrial coatings renew industrial painting

26/10/2023 Water-borne industrial coatings are more environmentally friendly alternatives to traditional solvent-based coatings. Their popularity has gradually increased in industrial painting, where it is essential to minimize VOC emissions. Water-borne industrial coatings designed for metal surfaces offer users several advantages.

Nor-Maali’s new water-borne Norecryl Aqua DTM provides a weather-resistant alternative to anticorrosion painting – without isocyanate

27/9/2023 Nor-Maali's new water-borne Norecryl Aqua DTM, a groundbreaking 2-component acrylic coating combines the corrosion resistance of epoxies with the weather resistance of polyurethanes. This environmentally friendly direct-to-metal coating also ensures user safety as it contains no isocyanates.

The pedestrian bridge at Heureka was maintenance painted using the SILKO coating system by Nor-Maali

26/9/2023 Korroosiotyö Korkal has maintenance painted the pedestrian bridge at Heureka in Vantaa, using the SILKO coating system by Nor-Maali: LIVI B.2+ Normastic 405 – Normastic 405 – Normadur 65 HS.

Uudenkaupungin Työvene is constructing a dredger

8/9/2023 Uudenkaupungin Työvene is in the process of building a dredger, set for delivery to Poland. The steel vessel will be painted with Jotun coatings, provided by Nor-Maali. The primary product used for the painting is Jotacote Universal S120, which helps reduce VOC emissions.

Nor-Maali Sweden introduces a new distributor: Tinter Jönköping

5/9/2023 The dealer network of Nor-Maali in Sweden welcomes a new member – Tinter Jönköping. Now we can serve our customers even better in the Jönköping area. Nor-Maali´s industrial coatings are available from 12 distributors in Sweden.